Dg500 Keypad Manual

| Problem | Probable Cause | Solution | |---------|----------------|----------| | Keypad dead | No power from panel | Check panel fuse, wiring, or transformer | | “Not Ready” | Open zone (door/window) | Close zone or bypass if intentional | | Invalid code | Wrong user code or wrong partition | Re-enter code; check partition access | | Can’t arm | Zone fault or tamper | View trouble condition on LCD | | Keypad beeps randomly | Chime mode active | Disable chime: [Code] + Chime |

Variations exist in the DG500 product line depending on the manufacturer (often generic OEM production). Key functions (like the button for 'Add User' being 2 or 3 ) may vary slightly. Always check the sticker on the back of your specific PCB for a cheat sheet of function codes if the codes above do not work. dg500 keypad manual

Enter the master code (Default: 1234 ). The RH LED will change to green, indicating you are in programming mode. Enter programming mode (as described above). Press 7 . | Problem | Probable Cause | Solution |

Example: Set zone 1 to entry/exit delay – * 1 0 1 0 1 # Enter the master code (Default: 1234 )

Enter a 3-digit user slot number (e.g., 001 for the first user).

By following this comprehensive guide, you'll be able to unlock the full potential of your DG500 keypad and enjoy a secure, convenient, and automated experience.