Puddle In Welding //free\\ -

The weld puddle is the molten area of the base metal that forms directly under or behind the heat source (the rod, wire, or torch). It is the liquid state of your final weld. If the puddle is the right size and shape, the resulting cooled bead will be strong and uniform. How to "Read" the Puddle

: To see the puddle clearly, many welders prefer a 45-degree angle looking from behind the weld pool. This allows you to monitor the trailing edge while keeping the weld seam in your peripheral vision. puddle in welding

In the world of welding, the most critical skill an operator must master is not the settings on the machine, but the ability to read and control the . The weld puddle is the molten area of

Technically known as a , the puddle forms at the point where the welding arc contacts the workpiece. This liquid metal remains active and workable until the arc moves away, allowing the metal to solidify into a permanent fusion bond. How to "Read" the Puddle : To see

Learning to "read" the puddle allows you to make instant adjustments to your heat, speed, and angle. Professional resources like Miller Welds emphasize that the puddle is the welder’s primary feedback loop.

: A circular, fluid puddle usually indicates good heat and travel speed. If the puddle becomes elongated or "points" like a teardrop, you may be traveling too fast or running too hot.