: Open a terminal window and run ls /dev/tty.* or ls /dev/ttyUSB* to find the device path (e.g., /dev/tty.usbserial-1410 ). 2. Create the Session in SecureCRT Launch SecureCRT . Click the Connect icon or navigate to File > Quick Connect . In the Protocol drop-down menu, select Serial .
+---------------------------------------------------------+ | Quick Connect | +---------------------------------------------------------+ | Protocol: [ Serial v ] | | | | Port: [ COM3 v ] | | Baud rate: [ 9600 v ] | | | | Data bits: [ 8 ] Parity: [ None v ] | | Stop bits: [ 1 ] Flow ctrl: [ RTS/CTS ] | +---------------------------------------------------------+ 3. Define the Serial Parameters securecrt serial
Verify the target device's status lights. Recheck Device Manager or /dev/ paths to ensure the assigned port index has not changed. Baud rate mismatch between host and client. : Open a terminal window and run ls /dev/tty
If you're seeking a specific solution or more detailed guidance, could you provide more context or clarify your question? Click the Connect icon or navigate to File > Quick Connect
: Choose Serial from the Protocol drop-down menu.