: Many InSinkErator models (like the Badger series) have four small screws located at the center of the outer shell. Removing these allows the plastic or metal casing to separate from the internal grind chamber. Summary Table: Tools for the Job Task Tool Needed Unjamming 1/4-inch Allen/Hex Wrench Removing from Sink Large Screwdriver or
If you turn on the disposal and it makes a humming noise but does not spin, the grinding plate is jammed. Do not run it for more than 10 seconds in this state, or the motor will burn out. how to open insinkerator garbage disposal
Look at the of the disposal unit. You will see a small hex-shaped hole in the center of the motor shaft. : Many InSinkErator models (like the Badger series)
Every InSinkErator comes with a small hex wrench. If you lost yours, a standard 1/4-inch hex key from any hardware store works. Tape it to the disposal or the inside of the sink cabinet so you always have it. Do not run it for more than 10
Use needle-nose pliers or long-handled tongs to extract the object.
Insert the 1/4-inch Allen wrench (or the provided Wrenchette) into this hex socket.