She slid it out. It was full of black, stagnant water and a layer of silt. If this pan is overflowing, water drips onto the floor. She carried it to the sink, dumped the foul water, scrubbed it with dish soap and a scrub brush, and rinsed it thoroughly. A clean pan means the fridge can evaporate water efficiently.
Look at the back wall of the fridge, near the bottom floor. You will usually see a small depression or a trough. Right in the center of that trough, there is a tiny hole—that is your defrost drain. unblock fridge drain
Groceries becoming soggy due to water backup. She slid it out
She pushed the fridge back into place, leveled the front feet so it tilted slightly backward (ensuring water flows toward the drain, not out the door), and plugged it in. She waited an hour for the temperature to stabilize. Then, she poured half a cup of water directly into the drain hole. She listened. A few seconds later, she heard the faint, musical drip… drip… drip of water falling into the evaporation pan. The drain was singing again. She carried it to the sink, dumped the
Puddles under the crisper drawers or at the very bottom of the fridge.
Safety first! Remove the bottom shelf and any crisper drawers so you have clear access to the back wall of the refrigerator. Unplugging the appliance isn't strictly necessary for the plumbing part, but it’s safer if you need to unscrew any panels near electrical components.
Your refrigerator goes through a defrost cycle regularly to melt frost off the cooling coils. That melted water is supposed to drip down into a drain hole at the back of the fridge, travel down a tube, and collect in a pan near the compressor, where the heat evaporates it.