Only mix what you can use within the product's "pot life" (gel time), as it cures very rapidly. 3. Installation
Use a rotary percussion drill to create the hole; avoid diamond drilling as the smooth sides can reduce bond strength. lokfix p80
Lokfix P80 is an anaerobic adhesive. This means it remains liquid in the presence of oxygen but hardens into a tough, thermosetting plastic when confined between tight-fitting metal surfaces (like a shaft and a bearing). Only mix what you can use within the
Clean the steel bar or bolt to remove rust, oil, or grease that could interfere with the bond. 2. Mixing the Resin Two-Part System: Lokfix P80 consists of a base resin and a liquid hardener. lokfix p80