If the cable has snapped or the internal wires are severed midway down the rod, a splice is required. Note: This creates a stiff spot in the cable.
A drain camera does not fix pipes – it replaces guesswork with evidence. Match every visual defect to a specific repair method before digging or lining. drain camera repairs
: Replacing O-rings and using dielectric grease to prevent water intrusion. YouTube +3 Maintenance Checklist (Paper/Report Format) If you are creating a report or "paper" to track the status of your equipment, you should include these key fields based on industry standards : Section Checkpoint Status (Good/Fail) Camera Head Lens clarity, LED brightness, and scratch level Pushrod/Cable Signs of kinking, outer sheath splits, or exposed wires Connectivity Video feed stability when the cable is wiggled Monitor Unit Battery health and counter (meter/feet) accuracy Cleanliness Debris removed and seals lubricated after last use DIY Tip: The "Reverse Thread" Trap Be careful when disassembling camera heads; some components use If the cable has snapped or the internal
Is the pipe collapsed or missing >2" of wall? ├─ YES → Open cut repair or pipe bursting (full replacement) └─ NO → Continue Match every visual defect to a specific repair